| Customization: | Available |
|---|---|
| Rated Voltage: | 11kv 3phase 50Hz/60Hz |
| Load Wire Connection: | 3phase 3wire |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
2.1 Measuring Function
Steady-state Test: load power in rated range, measure generator steady-state 3 phase voltage, current, active power, reactive power, apparent power, power factor, frequency, and running time.
2.2 Dummy Load Function
2.2 Control Mode
(1) Control Mode: local, remote or intelligent control(software) for choosing.
(2) Local Control: local control panel with several power steps, load or unload by switch on-off and read parameter values from measuring meter.
(3) Remote Control:through the switch in the remote control box, control the load over a long distance.
(4) Intelligent Control: through data processing software, realize all the test functions, display, record and manage the testing data, and generate curves, graphs and tables can be printed.
(5) Control Mode Interlock: with control mode switch, no matter chooses which mode, operation of other mode is invalid, avoid the clash.
2.3 Intelligent Load Function
(1) Communication Mode: using photoelectric isolated RS485 communication serial port connect to PC, and with great anti-interference performance to make system control stable. Through converts like USB or RS232 realize communication protocol conversion.
(2) Load Mode: steady-state load (manual load, preset load and automatic load) and transient state load (instant load and instant unload).
(3) Manual Load: input power and power factor, and load according to the preset value.
(4) Preset Load: input generator related parameters, then choose the preset proportion from 0% 25%, 50%, 75%, 100% or other available order and calculate the power value automatically and realize rapid load.
(5) Automatic Load: set several load stages and duration, then complete the process according this stages automatically. Pause at any time or start to next stage in the load process.
(6) Parallel Test: several load banks work in parallel, the parallel test via software. Parameters of each set can be displayed in each meter and total parameter values can be displayed and recorded.
2.6 Technical Parameter
| System Parameter | |
| Rating voltage/frequency | 13.8KV, 3 phase 3 wire 60Hz |
| Max Load Power | Resistive Load: 2MW |
| Load Resolution | Total 4 steps 500kW,500kW,500kW,500kW |
| Power Factor | 1 |
| Load Tolerance (each step) | ±5% |
| Load Tolerance (overall) | ±3% |
| Fan &Control Voltage | External AC 3 phase 4 wire, 380V/60Hz |
| Wire Connection | Load bank input--Copper bar (star coupling "Y") Control power input--Connector-bar |
| Communication Interface | RS485,RS232 |
| Insulation | F |
| Max Protection Grade | IP55 |
| Duty Cycle | Continuous |
| Cooling | Forced air cooling, by Axial Fan; horizontal inlet air, vertical exhaust cooling |
| Enclosure | Container type,with a ladder, air inlet and outlet with mesh enclosure and protection door |
| Internal Lighting | Adequate internal lighting will be provided |
| Transportation | Hoisting, there are lifting lug in top of casing |
| Color | Grey RAL7035 or as required |
| Dimensions | About 12192mm×2438mm×2591mm(L×W×H) |
| Operating Environment Parameter | |
| Ambient Temperature | -20ºC~+50ºC |
| Relative Humidity | ≤95% |
| Atmospheric Pressure | 86~106kPa |
| Brands of Main Components | |
| Contactor | Xiguang |
| PLC | Siemens |
| Fuse | Chuantai |
| Alloy Resistor | (self-developing) |
| Data Processing Software | (self-developing) |
){kind=link}