| After-sales Service: | 12months |
|---|---|
| Warranty: | 12 Months |
| Power Source: | 400V |
| Rated Voltage: | 400V, 3phase, 50Hz |
| Resistive Power: | 3500kw |
| Cooling Type: | Forced Aircooling |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier General Introduction of 3500kW Generator Load Bank
Kaixiang Load Bank can simulate the real working conditions and provides a rigorous test regime for power supplies from 1kW to60MW. Resistive, inductive(reactive),capacitive or combined load banks can be customised for any application. They can be used for testing numerous sets in a workshop environment, or used for on-site commissioning, witness tests and proof trials.
Custom-built load banks can be supplied for most powers, voltages, frequencies and sizes. Multi-voltage load banks are also available for operation over a large voltage range. At the same time, It can operate in parallel with more than two units.
Kaixiang Load Bank are available in stationary type for permanent installation or portable type with fork lift pocket base, castors. Larger load banks, typically above 1250kVA, are based on an ISO container construction. Special finishes including custom paint colors and stainless steel casings can be supplied.
Main features and advantages of 3500kW Generator Load Bank
1. Control mode: (1)Local manual control panel (2)Remote manual control box (3) Remote console(include manual panel and PC control)(4)Laptop control
2. Protection function: Overvoltage, overcurrent, overheat, over low blowing rate, blower overheat, blower phase sequence reverse protection, smoke alarm etc.
3.Cooling: Industrial heavy duty blower, horizon air intake, upwards outlet, low noise.
4. Power consumption components: Made by special alloy resistance, high-temperature resisting, high heat dissipation capability, high heat stability, no naked light, safety and reliability. Running temperature is 1/3 of rating.
5. Weather-proof structure: Containerized structure provides ultra protection, protection grade higher than IP55.
6. Material and coating: The body adopt cold-rolled steel plate that processed by galvanizing corrosion protection, powder coated and spray paint.
7. Integrated & modularization design: Easy to installation, maintenance and transportation.
|
System Parameter |
|
|
Rating voltage/frequency |
400V 3 phase 4 line, 50HZ or 60HZ |
|
Max Load Power |
Resistive Load: 3500kW |
|
Load Resolution |
Resistive Load: 26steps, 1kW,2kW,2kW,5kW,10kW,10kW,20kW,50kW,100kW*2,200kW*16 |
|
Power Factor |
1 |
|
Load Tolerance (each step) |
±5% |
|
Load Tolerance (overall) |
±3% |
|
Fan &Control Voltage |
External 380V 3 phase 4 wire, 50HZ |
|
Wire Connection |
Load bank input--Copper bar (star coupling "Y") Control power input--Connector-bar |
|
Communication Interface |
RS485,RS232 |
|
Insulation |
F |
|
Max Protection Grade |
IP54 |
|
Duty Cycle |
Continuous |
|
Cooling |
Forced air cooling, by Axial Fan; horizontal inlet air, vertical exhaust cooling |
|
Enclosure |
Container type,with a ladder, air inlet and outlet with mesh enclosure and protection door |
|
Internal Lighting |
Adequate internal lighting will be provided |
|
Transportation |
Hoisting, there are lifting lug in top of casing |
|
Color |
Grey RAL7035 or as required |
|
Dimensions |
About 6058mm*2438mm*2591mm(L×W×H) |
|
Weight |
About 7500kgs |
|
Operating Environment Parameter |
|
|
Ambient Temperature |
-10ºC~+50ºC |
|
Relative Humidity |
≤95% |
|
Atmospheric Pressure |
86~106kPa |
|
Brands of Main Components |
|
|
Contactor |
Schneider |
|
Fuse |
Miro |
|
PLC |
Siemens |
|
Alloy Resistor |
(self-developing) |
|
Data Processing Software |
(self-developing) |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}