Load Bank, Generator Load Bank, Dummy Load Bank manufacturer / supplier in China, offering AC Generator Load Bank, 200kw Generator Test Load Bank, 5000kVA Load Bank for Generator Test and so on.
Function of 1KW to 500KW 3 ph genset Load Bank
1) User could load any power within rated power, can test stable state three-phase voltage, current, active power, reactive power, apparent power, power factor, frequency, running time of generating set.
2) Whether load/unload by manual control panel, remote control or by PC software control, user can pre-set the power then press the master load button.
3) Control mode: user can choose local manual control, remote control or Intelligent control(PC control)
3.1 Local manual control: there is local control panel in load bank, with multi load steps, min load steps 1kW, controlled by buttons.
3.2 Remote control: remote controller connected the load bank with control cable.(optional)
3.3 Intelligent control: user can control load bank by data processing software of PC to make automatic load/unload, display, record and manager the test data, form curve, graph and can be printed.
4) Control mode interlock: there is switch in control panel to choose control mode, other control mode is invalid if user choose one control mode.
5) With data processing software, could form curve of current, active power, reactive power, apparent power, power factor, frequency and can be printed.
6) One-key load/unload: user can load or unload with one key easy to control.
7) 3 line LED multi-function meter display.
Protection of 1KW to 500KW 3 ph genset Load Bank
1) User can press the emergency stop button in the panel to unload immediately when the load bank is abnormal while working.
2) Over-load: Automatic load dump and give alarm when voltage is over safety thresholds.
3) Over-heat protection: Automatic load dump and give alarm when temperature is over safety thresholds.
4) Short Circuit Protection: Fuse could avoids damage to equipment when short circuit or current overload.
4) Fan protection: Machine could not do load testing before working power of fan is on.
5) The machine will unload and give alarm when any fan is abnormal or with insufficient air volume, etc.
6) When control power cable in wrong connections, 3 phase fans can also work in good conditions.
7) Protection button: there are some protection buttons can be switched off when false alarm or for special requirements.
Technical Parameter of 1KW to 500KW 3 ph genset Load Bank
AC400-500kW Automatic Load Bank
400VAC/50Hz, 3 phase 4 line, line voltage 400V, phase voltage 230V
Rated Load Power
Resistive load: 500kW
Resistive load: 500kW
1,2,2,5,10,10,20,50,100,100,200kW, min step load: 1kW
Load Tolerance (each step)
380VAC/50Hz, 3 phase 4 line, 220V 1-phase
Load power supply input--Copper bar (star coupling)
Control power supply input--Connector-bar
Force air cooling, horizontal air inlet and horizontal air outlet
Hoisting, there are lifting lug on top and castors at the bottom of casing
Grey(RAL7035)or as required
Operating Environment Parameter
Brands of Main Components
Data processing software