Resistive Load Bank 4500kw Load Bank for Sale for Generator Testing

• After-sales Service: 12 Months
• Max Diameter of Workpiece: 500mm
• Mass Scope of Workpiece: <900kg
• Type: Testing Electrical Equipment
• Maxcapacity: >1000KN
• Accuracy Grade: 0.5
• Model NO.: Resistive load bank 4500kw
• Load Way: Electronic Load
• Loading Method: Static Load
• Display: Digital
• Control: Computer Control
• Weight: 1000-2000Kg
• Power Source: AC380V
• Oil Cylinder Position: No
• Color: Variety
• Dimension: About 6100mm*2438 mm*2591mm
• Load Tolerance: 5%
• Transport Package: Plywood Cases
• Specification: 4500kw
• Trademark: triumph load
• Origin: China
• HS Code: 90303390
• Production Capacity: 100/Month

Product Description

Product introduction
Resistive load bank 4500kw load bank for sale for generator testing
Load bank testing replicates and verifies the operation of critical power equipment such
as generating sets, uninterruptible power supplies and battery systems. we manufactures
leading load banks for a range of applications and environments.
Main functions:
1. Users can set adjustable load power within rated power.
2. Current, voltage, frequency, power factor, and active power, reactive power, and apparent power can be      displayed.


3. With software programmable control, graphs of current, voltage, frequency, power factor, power can be displayed, saved and printed.
Control mode: manual control (control panel) with remote control or PC intelligent control.
Display meters: multi-function digital meter or generator tester. 
Protection: Over load protection, over heat protection, short circuit protection, Emergency stop switch, etc
Cooling: Force air cooling. 
Specification

System parameters
Rated voltage	AC three-phase three-wire 4 5 0V
Rated Power	Purely resistive load 4500KW;
Power Factor	1 and 0.8 for each two
Resistive Binning	1KW × 1, 2KW × 2, 5KW × 1 10KW × 2, 20KW × 1, 50KW × 1, 100KW × 2, 200KW × 21
Load accuracy	± 3%
Cold state change	After long-term use of the load, the rate of resistance change ≤ ± 3%
Imbalance	Resistance phase imbalance ≤ ± 3%
Display accuracy	0.5
Power Supply	AC three-phase four-wire 380V/50Hz, with a phase sequence protection
Insulation class	Class F
Insulation resistance	≥ 30MΩ
Resistor Installation	Insulation made of high-strength composite structure, the resistance of the insulation board is installed, the resistance and the overall chassis isolation.
Electromagnetic Compatibility	Equipment is available in special measures are not taken shielded ordinary venue operation, electromagnetic compatibility compliance with the relevant standards, electromagnetic compatibility tests before leaving the factory.
Other parameters	Insulation resistance (resistance per unit): AC1500V, 50Hz, 1min not breakdown Melting point: 1500 ºC maximum working temperature 320 ºC
Control	Local automatic control (control via local control panel) Intelligent Remote Control (via the remote controller is installed to control the data processing software) (Or is controlled by data processing software installed on the laptop) Each control can display cabinet work load status and alarm indication.
Remote Controller	Computer packed aluminum box
Wiring	Using copper wiring, each phase can be connected to 16 low voltage cable 1 × 240mm ²
Protection class	IP5 5 (during storage)
Work	Continuous work
Cooling	Forced air, side air intake on the wind
Chassis construction	Container type, with up to the top of the ladder
Transportation and seismic design	Box using standard container design, bearing hanging hole, in line with lifting and transport conditions. Lifting points can be issued by non-destructive inspection reports, bearing more weight to the load box three times.
Illumination	With internal lighting and power socket and put condensation heaters fitted
Inlet and outlet protection with vents	Equipment cabinet inlet and outlet with a protective door, turn off the water. Optional protection on both sides of the vent doors, shutters can also choose to add stainless steel fence, to prevent the entry of foreign matter and other small animals.
Top waterproof design	Around the outlet along the top of the chassis are waterproof, rain deflector can be, shed from a secure location to prevent the top of the water, is conducive to the chassis storage and use in continuous rainy weather.
Load box volume	Approximately 6125mm × 2438mm × 2591mm (L × W × H)
Load box weight	About 12000kg
Me change the volume	Approximately 6125mm × 2438mm × 2591mm (L × W × H)
Me change the weight (0.8)	About 22000kg
Me change the weight (1)	About 15000kg
Box changes	About 15000kg
Work environment parameters
Operating Temperature	-10 ºC ~ +50 ºC
Relative Humidity	≤ 95%
Altitude	≤2500 meters
Atmospheric pressure	86 ~ 106kPa
Seismic intensity	8 degrees

Why Choosing Us?
1. Hebei Kaixiang Electrical Technology Co., Ltd is the largest and earliest load bank manufacturer in China, we have 20 years experience. Our factory has 25,000 square meters. We are the leader in domestic market.
2. The sole company that draft the enterprise standard "dry-type load bank".
3. China Power Industry Top Ten Famous Products.
4.  China Power Supply Recommend Products.
5.  Our Intelligent High Power Marine Use Gensets Dry Type Load Bank wins International advanced level by Science and Technology Department of Hebei Province.
6. Certified with China Classification Society (CCS) and ISO9001:2008 Quality Certificate.
7.  Certified by SGS.
certificate